Client Software User’s Manual
/ : Click to start or off record. Click for record path settingˈClickfor record playback ˖Click for brightness/contrast/Saturation/color setting
channel info, time, text color and position. 3.2.1.3 Sheltered Area Sheltered Area as needed. Hold Ǐctrlǐ to drag mouse choose the area, click Ǐcle
3.2.1.4 Motion Detection ǏArea settingǐHold Ǐctrlǐ choose the area, max 4 zones allowed. ǏSensitivityǐSetting high for high sensitivity. ǏValid Peri
3.2.2 PTZ Control Click adjust focus Click adjust aperture Click adjust lens Click up/down/left/right control pan&tliti or
Cruise ˖Click setting the route or choose the already one by drop down list, click to stop the cruise. Click the mouse right key then cho
3.2.3 Device List Display connected devices name, domain name, channel name ,etc. Click to add device. Click to pop device property dialog. Click
Click to start or stop screen switch ( mean the switch is in process). 3.2.5.2 Client_side Setup Client Setup Clickto setup record path/alarm
Local User Management Default password is blank. After login, allow add new user and related password/private. Password will be needed when quit u
Automatic_Record Allow time record channel/period setting, save path setting inǏclient setupǐ. The interface indicator will blink after start thi
Please choose device IP under ǏDevice-side Fileǐthen clickǏFindǐwhen check file in SD card. Mark1:Event mean trigger MD or alarm, event record mean
Index1 Brief Introduction...1 2 Ins
3.3 Device property Click or choose IP address in device list, click ǏPropertyǐ by right key to pop dialog, setup or adjust IP addressǃDDNǃPPP
Mark2: When link 2 or more devices, need change related IP address and physical address. Mark3: Outer net visit need mapping the service port, refer r
3.3.3 PPPoE The client software allow PPPoE . Link the device to phone line through modem, dial to internet. User can visit the monitor picture by
3.3.4 Multicast Use set device as needed to realize the multicast function. Design and specification are subject to change without prior not
3.3.5 E-Mail When choose mail service, the device will send event report and picture to the appointed mailbox when alarm or MD triggered. De
ǏSMTP ServerǐFollow your mailbox hints for related setup. ǏSMTP Portǐdefault 25. ǏSender’s AccountǐNeed according to the SMTP service if your mailbox
3.3.7 Alarm In Design and specification are subject to change without prior notice 24
ǏchannelǐAllow setup name for choosed channel. ǏActions take to response to alarmǐSound alarm, notice client , send e-mail. ǏOutput to ǐSetup outp
ǏValid period of timeǐSetup alarm output time period. + mean valid period,- mean except the period 3.3.9 PTZ ǏVideo Channelǐchoose video chann
ǏAddressǐMatching the PTZ address with protocol. ǏProtocolǐSupport Palco-D & Palco-P, default is Palco-D. ǏStep Lengthǐ Range 1~64, default 32. Hi
1 Brief Introduction The software used to realize the central control for all internet video monitor devices (including:DVS and IP camera) : monitor
ǏNameǐSetup channel name. ǏResolutionǐQCIF / CIF / Half_D1 / D1. ǏPAL/NTSCǐChoose PAL or NTSC. Mark1: Need restart device to valid new setup. Mark
ǏChannel NumberǐChoose the channel no. ǏBits Widthǐ8bits / 16bits / 32bits optional. ǏSampling Rate ǐThe effect will better with frequency increase.
User management is use to add, delete or modify user name and password, and setup corresponding authority. User name can only be English character or
3.3.13 Update User can update device local by client or long distance through IE. Device will auto restart after upgrade. User can check current versi
3.3.14 Record The record property will auto display when link to SD card. In other condition, please clickǏIPǐĺǏPropertyǐĺǏRecordǐto pop the dialog: S
3.3.15 Wireless NIC Wireless network card property will auto display; in other condition click ǏIPǐĺǏPropertyǐĺǏRecordǐ to pop the dialog: Design and
3.3.16 Miscellaneous˄UPnP function˅UPnP( Universal Plug and Play), the router will auto mapping TCP and UDP port. Mark1: Router must support UPnP func
4 Other 4.1 LAN and WAN configuration i LAN automatically search Run DVS Client, Click, the video server in the local LAN will appear in the device
virtual services. Appendix A IE mode When first visit device through IE, user need add http:// by manual to pop the following dialog: ClickǏǐ down
Storage IP Box Camera User’s Manual Note: WIFI function is an option of IP camera
Select English, and clickǏOKǐ˖ Click ǏNextǐ, the window below will pop up: Press ǏBrowse…ǐ to change the default path. If you do not want to cha
Index 1 PRODUCT OVERVIEW ...11.1 PERF
1 Product Overview Storage IP box Camera is an embedded device designed for network video surveillance application. Optimized H.264 video compression
z Provide RS485 serial port with several built-in high-speed domes and decoder protocols, supports transparent protocols. 1.2 Interface Storage IP
2 Client Software Installation Guide System requirement z Operating System: Windows 2000/XP/Vista z Processor: Intel Pentium III, 1G or Higher
Click ǏNextǐ, the window below will pop up: Press ǏBrowse…ǐ to change the default path. If you do not want to change, press ǏInstallǐ. The below
3. Client Software Instructions Guide 3.1 Main Interface Run DVS Client software, need input password, default is blank. Pls refer ǏClient Setupǐ ĺ
Mark1: If device not in same network segment, the software can search the IP address but can’t link. Please change device and pc in same segment. Mark
Choose the right device, input user name and password, default is ĺ admin, as following: Click Ļ ǏConnectǐ, the right column will display the device
3.2 The function descriptions 3.2.1 Toolbar Followed by login info, talk, sound, snap, record, color, setup, rotation, play. ˖Click to chec
3.2.1.2 OSD OSD is “on screen display”, mean the info accompany with the image. Allow setting channel info, time, text color and position. Design
ǏInstallǐ. The below window will pop up: Then the setup is completed successfully. Design and specification are subject to change without prior noti
3.2.1.3 Sheltered Area Sheltered Area as needed. Hold Ǐctrlǐ to drag mouse choose the area, click Ǐclearǐ to delete it. The mask effect as below:
3.2.2 PTZ Control Click adjust focus Click adjust aperture Click adjust lens Click up/down/left/right control pan&tliti or
Cruise ˖Click setting the route or choose the already one by drop down list, click to stop the cruise. Click the mouse right key then cho
3.2.3 Device List Display connected devices name, domain name, channel name ,etc. Click to add device. Click to pop device property dialog. Click
Click to start or stop screen switch ( mean the switch is in process). 3.2.5.2 Client_side Setup Client Setup Clickto setup record path/alarm
Local User Management Default password is blank. After login, allow add new user and related password/private. Password will be needed when quit u
Automatic_Record Allow time record channel/period setting, save path setting inǏclient setupǐ. The interface indicator will blink after start thi
Mark1:Event mean trigger MD or alarm, event record mean MD or alarm trigger record. Mark2:Device port file mean file save in linked SD card. 3.2.5.4
Mark1: IP address will valid only after device restart. Mark2: When link 2 or more devices, need change related IP address and physical addre
ǏDDNS Service Providerǐnow support www.oray.net and www.3322.org. ǏUser NameǐOne account can apply different domain name, the provider request not sam
3 Software Instructions 3.1 Main Interface Run DVS Client software, need input password, default is blank. Please refer ǏClient Setupǐ ĺ Ǐlocal user
3.3.4 Multicast Use set device as needed to realize the multicast function. Design and specification are subject to change without prior notice 2
3.3.5 E-Mail When choose mail service, the device will send event report and picture to the appointed mailbox when alarm or MD triggered. ǏSMTP Server
Adjust device date, time. ClickǏSame with PCǐto synchronous with pc. 3.3.7 Alarm In ǏchannelǐAllow setup name for choosed channel. ǏActions take to
Mark: The record in SD card will lead the real record time add 0-20s base the setting. 3.3.8 Alarm Out ǏchannelǐAllow setup name for choosed cha
3.3.9 PTZ ǏVideo Channelǐchoose video channel. ǏAddressǐMatching the PTZ address with protocol. ǏProtocolǐSupport Palco-D & Palco-P, default is
3.3.10 Video Channel ǏChannelǐChoose the channel no. ǏNameǐSetup channel name. ǏResolutionǐQCIF / CIF / Half_D1 / D1. ǏPAL/NTSCǐChoose PAL or NTS
Mark1: Need restart device to valid new setup. Mark2: 4 channel DVS only support channel 1 set as D1 format. 3.3.11 Audio Channel ǏChannel NumberǐCho
Mark: Suggest keep the default setting in normal. Just click open talk back function. 3.3.12 User User management is use to add, delete or modi
Administrator: Authorized to setup device and manage user. The defaultƹ administrator id is admin, password is admin, the id is no allowed to delete
Mark: Online upgrade file DAT is pk2. Firmware program and client program can be upgrade integrated or separated. 3.3.14 Record The record property
Mark1: If device not in same network segment, the software can search the IP address but can’t link. Please change device and pc in same segment. Mark
Set file limit, 0 mean no limit Valid record period Mark1: Please cut off device before plug SD card. Mark2: Choose FAT32 type when format SD card. Ma
3.3.16 Miscellaneous˄UPnP function˅UPnP( Universal Plug and Play), the router will auto mapping TCP and UDP port. Design and specification are subject
Mark1: Router must support UPnP function Mark2: Recommend external port between 1025-32767 4 Other 4.1 LAN and WAN configuration i LAN automatica
flashing. If PC has firewall working? If yes, should do it again after closing the firewall.Ĺ i WAN manually search If users want to login in anot
ClickǏǐ download the client and control , then install it. Then input user name and password (default is admin ) can get monitor page, see below: D
Choose the right device, input user name and password, default is ĺ admin, as following: Click Ļ ǏConnectǐ, the right column will display the device
3.2 The function descriptions 3.2.1 Toolbar Followed by login info, talk, sound, snap, record, color, setup, rotation, play. ˖Click to chec
Comments to this Manuals